What preparations should be made before the construction of glass fiber facing felt

Preparation before construction:

1. Material preparation: prepare a detailed material supply plan according to the drawings and engineering conditions. All materials mobilized must be qualified products and meet the relevant national, industrial and regional specifications.

2. Construction machines and tools: inspect the machines and tools used to ensure their good performance.

3. Personnel preparation: technical training and disclosure for technical workers.

4. Technical preparation: be familiar with drawings, prepare relevant atlas and quality acceptance standards.

Roof construction method:

1. When laying the glass fiber felt, the veneer shall face the indoor side and be perpendicular to the purlin;

2. During unwinding, ensure alignment and tension, and lay the facing felt at the eaves of the other side;

3. The two roll surfaces are connected together by binding with a stapler on the trim flash;

4. Install the facing felt and remove the clamps at the eaves on both sides;

5. Pay attention to keep the tension and alignment of the glass facing felt, and the joints between rolls are tight.