Products
Fiberglass Surface Tissue
Fiberglass Surface Tissue is used as surface layers for covering up the under layer texture and resisting corrosion. The glass fiber dispersed randomly, wet laid and bonded into thin tissue. The fiberglass surface veil is compatible with polyester resin and epoxy resin.
Features
Introduction:
Fiberglass Surface Tissue is used as surface layers for covering up the under layer texture and resisting corrosion. The glass fiber dispersed randomly, wet laid and bonded into thin tissue. The fiberglass surface veil is compatible with polyester resin and epoxy resin.
Features:
Smooth surface,
fast impregnation,
anti-corrosion,
anti-aging,
uniform fiber dispersion,
good mould obedient
Application:
Fiberglass Surface Tissue is used in filament winding process for FRP pipes and vessels;
It’s also used in hand lay-up process for moulding parts.
Specification:
30g, 40g, 50g for filament winding and hand layup process.
# | Basic weight | Binder content | Soaking time | Tensile strength MD | moisture content |
unit | g/m² | % | s | N/5cm | % |
for filament winding | 20 | 7 | ≤8 | ≥20 | ≤0.2 |
30 | 6 | ≤10 | ≥25 | ≤0.2 | |
50 | 6 | ≤16 | ≥40 | ≤0.2 | |
for hand lay-up | 30 | 7 | ≤10 | ≥20 | ≤0.2 |
40 | 6 | ≤15 | ≥25 | ≤0.2 | |
50 | 6 | ≤20 | ≥30 | ≤0.2 |
You Might Also Like
Send Inquiry
