Products
Fiberglass Chopped Strand
Fiberglass Chopped strand is chopped from fiberglass into certain length, coated with silane sizing. It’s design to reinforce the thermoplastic and thermoset resins in BMC and BMC in molding process including injection and compression. It’s compatible with various resin system such as PA, PP, PET, ABS, etc.
Features
Introduction:
Fiberglass Chopped strand is chopped from fiberglass into certain length, coated with silane sizing. It’s design to reinforce the thermoplastic and thermoset resins in BMC and BMC in molding process including injection and compression. It’s compatible with various resin system such as PA, PP, PET, ABS, etc.
Features:
Good integrity and wet-out,
good dispersion,
low static,
good mould obedient
Application:
Fiberglass Chopped strand is used in moulding, injection and premixing for automobile industry, home appliances, walves, pump housings, sports equipment, etc.
Specification:
Chopped length: 3mm, 4.5mm, 6mm, 12mm, 18mm
For BMC, for PET/PP/PA/ABS, for cement
Application | Resin Compatibility | chop length | moisture content | Loss on ignation | Filament diameter |
For BMC | BMC/DMC | 3 - 12 | ≤0.12 | 1.40+/-0.2 | 10 |
For Thermopolastics | PBT/PET | 3, 4.5 | ≤0.1 | 0.85+/-0.2 | 10 |
PP/PE | 3 - 12 | ≤0.12 | 0.75+/-0.2 | 10 | |
UP/PF | 3 - 12 |
|
|
| |
PA | 3 - 12 | ≤0.12 | 0.85+/-0.2 | 10 | |
AS/ABS | 3 |
|
|
| |
For cement |
| 12 |
|
|
|
No Information
You Might Also Like
Send Inquiry
